This Faller model of a cathedral bears a reasonable resemblance to the church in Bad Wilsnack, which is the town that I named my layout town after, so I decided it would be a very appropriate model for my old town. I have now assembled it and I report on how the construction progressed.
The kit comes in a large box and is said to have 666 parts. My first step was to open all the bags and check that everything was present. I stacked them in piles on my desk.
There is no base for the building. The main body of the building is constructed from 4 parts, each of which is made from 'standard' wall panels with almost no fool-proof way to ensure that everything is square. I soon realized that accuracy was going to be very critical and I proceeded with utmost caution.
Some of the walls are made up from two parts, the joint between the parts being right in the middle of a course of stones, so no matter how carefully one glues them together, there will always be a line along the wall.
The walls are molded from a mottled gray plastic which looks way to clean and sterile for an ancient building, so I weathered the pieces, sometimes before assembly and sometimes after joining smaller parts together. I do this by painting them with black acrylic paint and wiping most of the paint off before it dries.
Due to the expected difficulty in getting the four main parts of the building joined perfectly square, I decided to leave them unglued until I had completed the interior light masks. The kit supplies seven heavy paper light masks that are to be folded up and inserted into the various parts of the building. The masks are mostly black and have very nice printed glass details for most of the windows, and perforated edges to aid accurate folding.
Previous experience has taught me that light can leak out of the perforations, defeating the whole aim of the masks, so I added black paper along all the folded edges to ensure that the boxes were light tight. I also glued some 12 Volt LED light strips on the inside of each paper box to provide the interior light.
One end of the church has a massive complex window with stained glass panels. It was at this stage that I found that the motif printed on the paper for this big window looked absolutely awful when placed against the plastic frame.
I decided I wanted something better than that so I tried making my own, which certainly looked better, but still somewhat unrefined.
I wanted to see what the prototype window looked like and started doing web searches on the Bebenhausen Kloster, and found a few images of the window. I then also stumbled (again) upon the great site of Frits Ostertun who had also assembled this Faller kit and had found out that the 130816 model of the Kloster includes a foil with the correct colors for this very window! I wrote to Faller and ordered the part from that kit and they sent it to me for €9,50
This is how the proper part looks:
I thought that there would be a way to see into the kit (especially since Faller sells an interior details kit 180346) so I designed some pews with a Wilsnack emblem on the ends of each pew to give it a local touch.
Unfortunately, the design of this kit does not allow for any open doors and you can't see through the windows, unless one makes the big stained glass window clear! So instead, I decided to make my own doors since I had gone to the trouble of designing the emblem.
I test fitted the paper mask boxes to also ensure that everything would line up well since some parts have to be glued with absolutely no guidance. I also made some of the buttress parts out of sequence so that I could use them to determine accurate positioning:
Once the main parts of the building had been attached to each other with their mask boxes inside, it was time to work on the roof.
Faller likes to 'weather' brown parts with some sort of white paint. I cannot fathom why they think that white is the right color dirt for any building that is not part of a cement factory, but they do, and this kit is no exception. The roof has splotches of white paint on it. In addition, in their pursuit of making generic parts they include duplicate, identical, sections of roof that have to be joined together leaving a clear straight line visible at the join.
When making parts Ⓤ and Ⓥ the instructions tell one to cut bits of the roof off. Close inspection determined that there is no need for this at all since the buttresses have a slot to fit over the roof at those points.
Other parts simply are not designed to fit together properly:
When attaching parts Ⓕ to the building, I needed to cut a bit off the roof for it to fit against the wall properly.
The whole roof is not glued to the building so that one can service the lighting and also the small servo motor that is included for moving the bell mechanism.
I opted to leave the flying buttresses off until I had the roof done and I also deferred attaching the two smaller side rooves to the main roof until I had the base of the spire ready. This is because there is no other way to know that the rooves are properly aligned, and the chance of the building being perfectly square as well as the parts of the roof being perfect is almost zero.
After placing the spire in place, I added the side rooves, using the base of the spire as a guide.:
As mentioned, a small servo motor is included to actuate the bell in the spire. There are two mounting brackets to mount the motor:
Electronics
The final steps were to add all the fine details on the bell tower. The top of the tower comprises 8 sections with a rod on top of that made of two parts. Then two fancy bits get threaded on top of that. The holes in those last bits need some adjustment to get them to fit.
There are small crosses and orbs supplied to decorate the apex of the four roof ends. I decided to add another Wilsnack touch by 3D printing a version of the Wilsnack hosts that they used to sell to pilgrims in the middle ages, and add them instead:
The details of the bell tower are quite intricate
Because Faller supplies parts on multiple identical sprues there are spare parts in cases where fewer than the number of sprues are needed. I cut them all off and bagged them for possible use on other projects.
Overall feeling on the quality of the kit
I was disappointed at so many steps with this model. I find the following issues inexcusable from a leading manufacturer:
- Joints between pieces running along the middle of a course of bricks/stone.
- Substituting an awful stained glass paper print when a beautifully detailed translucent foil has been designed and manufactured for the exact protype and shipped with another model.
- So-called weathering of one color (brown roof) with white paint.
- Very little design care to ensure accurate construction. Any inaccuracies will accumulate from the walls, to the roof, to the spire.
- Roof panels to be joined with nothing to cover the straight and visible joint running through roof tiles.
- Tiny parts to be added when they could so easily have been incorporated in other parts.
- Generic parts that have to be cut accurately, instead of being supplied in the correct size.
- Parts that have to be joined without any way of ensuring that once joined, they will be straight.
- Completely unnecessary trim parts (that could have been molded into the parts being glued onto) that only serve to introduce inaccuracies through inaccurate cutting and gluing.
It can be constructed well if you take extreme care in the construction.
